How do I Configure my PC to connect my LD7?

This FAQ will detail the steps required for configuring a Windows XP or Windows 7 PC for connection to a Veripos LD7 unit.

Note: To Find the IP address of LD7 please see FAQ How do I check the IP address of my LD7? under LD7 Equipment.

FOR Windows 7 PC 

• From the start menu go to control panel then Network and sharing center.
• Click Change adapter settings then right click Local Area Connection then click Properties:

• Then click Internet Protocol Version 4 (TCP/IPv4) and click Properties:

• Click Use the following IP address and configure your IP to be in the same range as the LD7 unit:

• For this example our IP was set to 192.168.2.120 as the LD7 unit had an IP of 192.168.2.127.
• Click OK to close the IP properties window and click OK to close the Local area connection properties window.

For Windows XP PC:

• From the start menu go to Settings then Control panel and then network connections.
• Right click on Local Area Connection and then click Properties:

• Click Internet Protocol (TCP/IP) then click Properties:

• Click Use the following IP address and configure your IP to be in the same range as the LD7 unit:

For this example our IP was set to 192.168.2.120 as the LD7 unit had an IP of 192.168.2.127.

• Click OK to close the IP properties window and click OK to close the Local area connection properties window.