Data output is available for the LD900 via three COM ports and through LAN1 TCP/IP socket (ICOM). ICOM ports ICOM1, ICOM2 and ICOM3 will output on ports 3001, 3002 and 3003 respectively.
To establish a connection to the ICOMs, LAN1 of the LD900 should be connected to the PC, with the PC and LAN1 should be on the same sub-network. The IP address of the LAN1 can be viewed/edited by navigating from the Home screen of the LD900 to Status > Receiver > Network .
When interfacing the ICOMs to the PC, make sure to use the appropriate port numbers for each ICOM.
By following the above, a connection to the ICOMs will be established.