Why can I not connect to the LD900 TCP/IP ports?

LD900 data output is available via three COM ports and seven LAN1 TCP/IP socket (ICOM's).

When troubleshooting any TCP/IP connection issue first verify that LAN1 of the LD900 is connected to the correct subnetwork. If required the IP address of LAN1 can be edited by navigating from the LD900 Home screen to Status > Receiver > Network.  

The standard ICOM output IP ports definitions are as follows:

ICOM1: Port 3001

ICOM2: Port 3002

ICOM3: Port 3003

ICOM4: Port 3004

ICOM5: Port 3005

ICOM6: Port 3006

ICOM7: Port 3007 

If the LD900 is mounted in a single format rack mount system with an accompanying Moxa 8 serial port expansion unit, seven ICOM ports will be dedicated as serial ports with default baud rate 115200: