The LD8 WebUI provides a terminal with which to send commands and receive information from the unit. The terminal can be accessed from the main page by clicking on the settings cog (⚙️) found at the top-right of the page, followed by the terminal icon (4th option down on right-hand side).
To find a LD8 unit user code enter the following:
The output will be similar to the below example, where the placement of the Unit User Code has been highlighted in red:
<VERIPOSINFO WCOM1_30 0 65.0 UNKNOWN 0 1.226 02008020 2bd7 14970
< 123456 NCC_CONTROLLED 80000733 "X"
Also highlighted (in blue) is the current service code, which will only be present if the unit is enabled. If the LD8 needs to be enabled see How do I enable the LD8?