The LD8 WebUI provides a terminal with which to send commands and receive information from the unit. The terminal can be accessed from the main page by clicking on the settings cog (⚙️) found at the top-right of the page, followed by the terminal icon (4th option down on right-hand side).
To use VERIPOS services it is firstly necessary to ensure that the LD8 is connected to an LBand beam appropriate for the current vessel work area. If configuring or switching a beams is required see FAQ How do I change my LD8 beam? Additionally it will be necessary to have the unit ID at hand, if it is not known see FAQ Where do I find my LD8 unit ID?
Email the VERIPOS Helpdesk (firstname.lastname@example.org) and specify the vessel name, vessel SAL number, unit ID and service(s) required.
Once the Helpdesk has confirmed that the unit has been enabled enter the command:
The output will be similar to the below example, where the current active service code has been highlighted in blue:
<VERIPOSINFO WCOM1_30 0 65.0 UNKNOWN 0 1.226 02008020 2bd7 14970
< 123456 NCC_CONTROLLED 80000733 "X"