The LD8 WebUI provides a terminal with which to send commands and receive information from the unit. The terminal can be accessed from the main page by clicking on the settings cog (⚙️) found at the top-right of the page, followed by the terminal icon (4th option down on right-hand side).
To verify the PPP Calculation presently in use by the LD8 enter the command:
The output will be similar to the below example, where the PPP Calculation in use has been highlighted in red:
< PPPSOURCE WCOM1_30 0 64.5 UNKNOWN 0 2.310 02002020 ae45 14970
To change the PPP Calculation from APEX to ULTRA enter the following command:
Alternatively, to change the PPP Calculation from ULTRA to APEX enter the following:
Once changes have been made enter SAVECONFIG.